ELRO DWH SERIES Manuál s instrukcemi

DWH SERIES VIDEO SECURITY SYSTEM Installation and Operation Instruction Manual This manual should be retained in a safe plac

AC Power ConnectionAntenna PowerPull-Out StandSD slotQUICK START GUIDE For further details on the installation of the camera bracket and fixings

11 System Operation Refer page20, for Camera, System and Recording Settings. Remote Access For an Android device Please read page 34 of this instru

Light State What it meansPower statusOn(Red)The camera is on.Off The camera is off.Flashing The camera is in pairing mode.LinkstatusOn(Green)The camer

INSTALLATION Setting the Camera Channel (Optional) Pairing the Camera to Receiver (Optional) Follow the steps in Camera Setup section (p.20) to setu

Camera Installation: A. Secure camera stand on the wall B. Loosen the thumb screw C. Adjust the camera to the correct viewing position then tight

SYSTEM INTRODUCTION Your monitor’s system software operates through a series of screens that let you choose groups of operations. For example, when y

WHAT THE ICONS MEANIcon What it doesAdjust the volume level. Select how you want the Live screen to display camera input: Scan between cameras (5 s

Live Screen Displays The Live screen displays in 2 views - Quad View or Full View. Quad View displays the images in 4 quadrants (only display camera t

Playing Back Recorded Video 1. Tap on the highlighted day containing the recording you want to view. The Record List screen will display that day

19 Camera SetupRecorder SetupAlarm SetupNetwork SetupSystem SetupQuick TipsMain Screen Sub Screens What it DoesPairs new cameras to the receiver.M

CONTENTSSYSTEM INTRODUCTION0404060707091010101111121313131415151717181820202020212121242525252627KIT CONTENTSQUICK START GUIDE SETUP THE CAMERASETUP

Camera Pairing Your camera is paired to the monitor at the factory to channel 1. To add new camera(s) to your system, you have to pair it to the diffe

Brightness Tap the camera to change brightness level. The default brightness is 0, and the range is from -2 through 2. Recorder Setup Screen Moti

Email AlertThe system can notify you when it detects motion from any camera by sending you anemail alert. The email alert contains information such as

4. Repeat the previous step for the PasswordThe password entered here must be the same password as the password for the outgoing email account.5. Re

Schedule Record Up to 5 scheduled recording sessions available in a single day. You are limited to the size of the SD card for how long a total recor

Clear a Scheduled Recording 1. Access the Schedule Record screen. 2. Tap on the scheduled recording you want to clear (1-5). The screen disp

3. Tap OK at the system reboot prompt. The Network Setup screen displays. Security Code Set up your security code to limit who can have access to t

4. Enter your security code. 5. Tap OK. The system will return to Network Setup screen. Note: Security code must be entered to gain remote access.

Period This selection allows you to select the alarm/siren duration for Clock Alarm and Timer. 1. Tap Period. The Set Siren Duration screen displays.

System Setup Screen Power Saving In Power Saving mode, the monitor will shut off LCD after idle for 2 minutes. Press Power button once to reactive

REMOTE ACCESSMAINTAINING THE SYSTEMUPGRADING YOUR FIRMWARETROUBLE SHOOTING PRODUCT SPECIFICATIONRECORDING TIME FOR MEMORY CARDBATTERY USED IN THE RECE

Screen Auto Lock In Auto Lock mode, the monitor will enter screen lock mode after it has been idle for 2 minutes. Auto Lock disables the touch screen

Clock Alarm This feature operates as an independent alarm clock. It does not affect the operation of live video or recording video. 1. Tap to displa

3. Tap on the AM/PM block to switch between the two. 4. Tap SAVE when you are finished. Timer This feature operates as an independent alarm clock.

System Upgrade To upgrade the firmware from the vendor website, you must download and store it in the SD card root directory. Refer to Upgrading Y

Quick Tips The Quick Tips screen provides additional details on important subjects of system operation. Tap on a subject to display the information.

Connecting to the internet35 The docking cradle charges your monitor as well as provides an internet connection. When you are connected to the interne

MAINTAINING YOUR SYSTEM 1. Eject the SD card from the monitor. 2. Place the SD card into a USB card reader/writer (not included with the purchase

37 No image Make sure the camera is power on. Make sure the monitor has enough charge / connect it to AC/DC adaptor. Move the camera closer to the mo

improve the night vision or place it in a well lit area (recommend to install a security lamp to improve lighting). LIVE screen has no icons. Screen l

39 PRODUCT SPECIFICATION Recording Tmie for Memory Card (32GB max) SD Card Capacity Single Camera (480x272) Multiple Camera (320x240 QVGA)1GB 200

IMPORTANT NOTICEPlease Read Before You Start

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules and ETSI (EN

 System “Device ID” and “Password” are provided on a label applied at the back of the LCD Monitor (behind the pull out stand). The “Device ID” and “

7 PLANNING YOUR LAYOUT SAFETY AND INSTALLATION TIPS LCD Touch Screen Monitor  keep away from heat sources and high temperature places  Avoid

any holes through an external wall for a cable, ensure the hole is sealed up using a suitable sealant to prevent drafts. To prevent a fire or electri

KIT CONTENTS 1 x Wireless Camera 1 x Wireless Touch Screen LCD Monitor w/Cradle